Audio-Technica ATW-201 Freeway Guitar Wireless System FREE SHIPPING

Elevation Music Store

Click for Live Help ---- Email Us: info@elevation-music.com

Audio-Technica's ATW-201 professional VHF wireless system includes an ATW-R200 receiver, ATW-T201 transmitter, and Hi-Z instrument cable. The ATW-R200 receiver design features an innovative docking power supply configuration. An AC power adapter housed in a compartment in the receiver uses an IEC-standard detachable power cordset. Furthering its flexibility, the power adapter may be easily removed from the receiver case, permitting its use as a conventional in-line AC adapter. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.

Audio-Technica ATW-201 Freeway Guitar Wireless System Features:

Advanced dipole antenna system

Available in 3 traveling frequencies

Removable docking power supply inserts into back of receiver

Adjustable squelch control

ATW-T201 UniPak transmitter includes variable microphone/guitar trim control

Audio-Technica ATW-201 Freeway Guitar Wireless System Specifications:

OVERALL SYSTEM SPECIFICATIONS

Operating Frequency: VHF high-band, 169-172 MHz

Number of Channels: Fixed channel

Frequency Stability: ±0.005%

Modulation Mode: FM

Maximum Deviation: ±15 kHz

Operating Range: 200' minimum

Operating Temperature Range: 40øF (4øC) to 110øF (43øC)

Frequency Response: 80Hz to 13kHz

RECEIVER SPECIFICATIONS

Receiving System: Non-diversity, single-channel, dual antenna system

Image Rejection: 50dB minimum

Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15kHz

Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz)

Sensitivity: 20dBæV for 60dB S/N (IEC-weighted)

Audio Output: 350mV (1kHz modulation, 10kHz deviation, 100kOhm load)

Output Connector: 1/4" TS (mono) phone jack

Power Supply: 120V AC 60Hz, 6 VA; or 12V DC, 200mA, center positive, with external DC supply

Dimensions: 8.27" (210.0 mm) W x 1.72" (43.5 mm) H x 4.73" (120.0 mm) D

Net Weight: 18.9 oz (536 g); without AC adapter, 11.9 oz (336 g)

Accessories Included: AD1202A 120V docking AC adapter; 120V AC IEC cordset

BODY-PACK TRANSMITTER SPECIFICATIONS

RF Power Output: 10mW High position, 2 mW Low position, typical

Spurious Emissions: Under federal regulations

Dynamic Range: =90 dB, A-weighted

Input Connections: High-impedance, low-impedance, bias

Battery: 9V (NEDA type 1604) alkaline, not included

Current Consumption: 30mA typical

Battery Life: Approximately 15 hours in High position, 20 hours in Low position (depending on battery type and use pattern)

Dimensions: 2.56" (65.0 mm) W x 4.33" (110.0 mm) H x 1.00" (25.4 mm) D

Net Weight: 2.8 oz (78 g)